Solutions | kpower
Home Solutions

Comprehensive Drive Products Series

Reliable smart cabin domain drive modules, validated through multiple rounds of "Automotive-grade" testing, ensuring safe and comfortable journeys for vehicle occupants.

Smart Home

Kpower offers compact, efficient, and quiet drive-control solutions with rapid feature iteration, dedicated to building our ideal living space.

Consumer Electronics

Kpower’s drive products feature compact size, precise control, and gear disengagement protection, meeting consumers' personalized demands.

Robotics

Lightweight, responsive joint drive solutions can further advance robotics, speeding up the commercial deployment of various robots effectively.

Precision Agriculture

Kpower’s drive products feature compact size, precise control, and gear disengagement protection, meeting consumers' personalized demands.

Industrial Automation

High-lifespan, high-torque brushless motors with built-in MCUs, ready for immediate use, responding to the refined and diversified trends of industrial upgrades.

Smart Home
Automobile
Robotics
Consumer Electronics
Industrial Automation
Precision Agriculture
No Data

Active Lift-up Servo Motor in Robot Vacuums

Installed above the drive wheels of the robot vacuums, it helps lifts & lowers to maneuver over obstacles such as carpets. Leveraging a carbon-brushed DC motor and powder metallurgy gears, it achieves a torque of 7.5 kg·cm and 650k cycles.

7.5kg・cm

Peak Toque

85RPM

No-load Speed

±1°

Positioning Accuracy

Sweeping/Scrubbing Robot Hub Motor

The direct-drive In-wheel motor of the robotic vacuum cleaner with integrated drive and control, is 40% smaller in volume compared to traditional geared motors, supporting UART communication and fault management.

>1000 hr

Lifespan

0.85N・m

Peak Toque

700RPM

No-load Speed

Drive-lift Integrated Module

The Drive-Lift Integrated Module features a patented design that combines the drive wheel and obstacle-clearing mechanism. Its volume is reduced by 50% compared to traditional solutions, and it is easy to install.

Drive-Lift

Integrated Design

7kg·cm

Lifting Torque

300RPM

Drive Speed

Front Scraper Servo Motor in Floor Cleaners

The Front Scraper Servo Motor actuates the scraper to actively press down via a linkage mechanism, ensuring edge-to-edge cleaning with no blind spots. The scraper replaces traditional fabric rollers, eliminating problems of odor and bacterial breeding.

135°

Angular Range

±1°

Positioning Accuracy

65RPM

No-load Speed

Edge-Sweep Extension Drive

This drive is located on the side of robotic vacuums. It uses a compact planetary motor to drive a mechanism arm, extending the side brush for comprehensive, edge-to-edge cleaning.

160RPM

No-load Speed

2.5kg・cm

Peak Toque

DC 12V

Operating Voltage

Side Mop Lift-up Motor in Robot vacuums

The lift motor above the mop operates via a micro reduction motor driving a lead screw, enabling the mop to lift over carpets and actively press down to enhance cleaning efficiency.

2.5kg・cm

Peak Toque

270RPM

No-load Speed

60,000

Cycle Life

Ceiling Screen Drive Module

It features an integrated drive-control design, supporting up to 3kg screen load and meeting 110° opening and closing requirements. It incorporates a built-in high-lifespan brushless motor and metal worm gearbox, achieving 30k opening and closing cycles.

110°

opening and closing requirements

<45dB

Running Noise

2.5kg

Swiveling Central Control Screen Drive Module

The module adopts a lightweight design, built-in high-performance brushless motor, and CAN controller. It meets the load requirement of up to 2kg of center control screen and supports a 30°-range pitch movement in all directions (up, down, left, right).

Tilting Entertainment Screen Drive Module

It enables the screen and the front seats to operate in tandem through various working modes,including manual and collaborative command modes, facilitating synchronized adjustments to both the seat angle and screen tilt.

Sliding Central Control Screen Drive Module

It adopts metal wire rod and damping backlash design, supports up to 6kg screen load and 600mm working stroke. It can realize 50,000 cycle life and meet the requirements of 3G vibration working conditions.

Skylight Screen Drive Module

It adopts a dual-screw combined with a multi-link design to open the large canopy screen, making the rear passengers feel like a movie theater. The design of brushless gear motors supports up to 6kg and 35" large screen opening and closing.

Sunvisor Entertainment Screen Drive Module

It integrates various components such as high-lifespan brushless motors, planetary gearboxes, backlash damping, drive controllers, position sensors, etc., It supports up to 1.5kg loads and 135° of motion travel.

DMS/OMS Camera Drive Module

It adopts a micro stepper motor combined with a precision screw to allow the camera module to be raised and lowered, giving consumers no privacy leakage concerns, and its integrated design meets the needs of multiple car layout.

Robot Joint Actuator

The Robot Joint Actuator features an integrated design with high-precision closed-loop drive control and dual magnetic encoders. It also includes overload protection along with waterproof and dustproof functions.

Up to 120N·m

High Toque

24-56V

Wide Voltage Range

Servo+Motion

Dual Control Mode

Micro Planetary Gear Motor

The micro planetary gear motor is specifically designed for bionic dexterous hand joints. It integrates a brushless hollow cup motor, metal planetary gear, and an encoder.

High Dynamic

Responsiveness

Closed-Loop

Position Feedback

Low

Heat Rise

Brushless Hub Motor Series

The brushless hub motor comes with an integrated encoder and controller, providing high precision and reliability. It supports expandable planetary gearboxes and is suitable for various intelligent service robots and warehouse robot load-moving chassis.

FOC Motor

Built-in

5 N·m

Peak Torque

160rpm

Rated Speed

Precision Micro Servo Motor

The servo is developed for all-degree-of-freedom dexterous hand joints, features a highly integrated design with a stall torque of up to 1.8 kg·cm. It meets the complex motion control requirements in robot structures with limited space.

18 gram

Lightweight Design

Multi-turn 360°

Angular Range

0.59x0.39 inches

Ultra-Thin Profile

Frameless Torque Motors

The frameless torque motor is suitable for space-limited applications and supports both direct drive and operation with a planetary gearbox. It can be integrated into robotic joints, underwater drives, and industrial equipment.

Housing&Load

Highly Integrated

Rare-earth Magnets

Magnets

up to 155°C

Sustains Temperatures

R/C Airplane Model Servo

R/C Car Steering Drive

R/C Boat Drive

AR/VR Force Feedback Servo

STEAM Education Kit Servo

Logistics Shuttle Fork Toggle Servo

This servo is specifically designed for warehouse systems, featuring a modular design compatible with various fork sizes. It includes an integrated MCU and supports multiple feedback types.

Over 8kg·cm

Peak Torque

360°

Work Range

One-Click

Center Position Calibration

EOAT Electric Quick-Change Mechanism

This innovative electric quick-change mechanism features multiple closed-loop feedbacks, including position, speed, and voltage.It uses a zero-backlash dual-metal worm gear, providing exceptionally high power density and a lifespan of 300,000 cycles.

50kg·cm

Rated Torque

12rpm

Rated Speed

Electrical Isolation

Built-In Position Recognition

Electric Push-Shear Drive

This actuator is designed for applications such as industrial robotic arms and automated gripping devices. It features a force-controlled motor for torque and position closed-loop control.

30-70N

Clamping Force

15~28mm

Stroke

Power-off

Self-locking

Electric Quick-cut Drive

This drive is used in electrically controlled scissors across various industries, featuring a brushless planetary gear motor. It supports position detection and meets data collection requirements.

500N

Cutting Force

6-8mm Blade

Compatible and Multiple

-20 to 85°C

Wide Temp Range

Electric Water Sprue Cutter Actuator

This horizontal sprue cutter actuator is designed for multi-cavity injection molding, capable of trimming multiple sprue components simultaneously. It features a precision brushless planetary motor for accurate force control.

Bi-directional Movement

Cams + guides

2.5~5mm

Cutting Capacity

1s

Cutting in

Frameless Torque Motor

The high-performance frameworkless torque motor features a compact, frameless design, making it suitable for confined spaces. It includes built-in Hall sensors and is applicable in robotic joints, underwater drives, and industrial equipment.

up to 155°C

Sustained Temperatures

Highly

Integrated

Hall Effect

Position Feedback

Electric Gripper Actuator

The electric gripper actuator is designed for applications in industrial robotic arms and automated gripping equipment. It features an integrated force control motor for torque and position closed-loop feedback.

30-70N

Clamping Force

15~28mm

troke

Power-off

Self-locking

Industrial High-torque Servo

Designed for industrial applications requiring high torque, rapid response, and long lifespan, this brushless metal servo supports peak torque up to 200 kg·cm.

200 kg·cm

Peak Torque

CNC

Aluminum Alloy Body

High-precision Magnetic

Encoder Sensor

Agricultural Drone Drive

Agricultural Machinery Spreading System Drive

Powering The Future

Contact Kpower's product specialist to recommend suitable motor or gearbox for your product.

Submit Request
Youtube
TikTok
Twitter
Facebook
Mail to Kpower
Submit Inquiry
WhatsApp Message
+86 180 0277 7165
kpowerMap