Solutions | kpower
Home Solutions
Comprehensive Drive Products Series
Reliable smart cabin domain drive modules, validated through multiple rounds of "Automotive-grade" testing, ensuring safe and comfortable journeys for vehicle occupants.
Smart Home
Kpower offers compact, efficient, and quiet drive-control solutions with rapid feature iteration, dedicated to building our ideal living space.
Consumer Electronics
Kpower’s drive products feature compact size, precise control, and gear disengagement protection, meeting consumers' personalized demands.
Robotics
Lightweight, responsive joint drive solutions can further advance robotics, speeding up the commercial deployment of various robots effectively.
Precision Agriculture
Kpower’s drive products feature compact size, precise control, and gear disengagement protection, meeting consumers' personalized demands.
Industrial Automation
High-lifespan, high-torque brushless motors with built-in MCUs, ready for immediate use, responding to the refined and diversified trends of industrial upgrades.
Smart Home
Automobile
Robotics
Consumer Electronics
Industrial Automation
Precision Agriculture
No Data
Active Lift-up Servo Motor in Robot Vacuums
Installed above the drive wheels of the robot vacuums, it helps lifts & lowers to maneuver over obstacles such as carpets. Leveraging a carbon-brushed DC motor and powder metallurgy gears, it achieves a torque of 7.5 kg·cm and 650k cycles.
7.5kg・cm
Peak Toque
85RPM
No-load Speed
±1°
Positioning Accuracy
Sweeping/Scrubbing Robot Hub Motor
The direct-drive In-wheel motor of the robotic vacuum cleaner with integrated drive and control, is 40% smaller in volume compared to traditional geared motors, supporting UART communication and fault management.
>1000 hr
Lifespan
0.85N・m
Peak Toque
700RPM
No-load Speed
Drive-lift Integrated Module
The Drive-Lift Integrated Module features a patented design that combines the drive wheel and obstacle-clearing mechanism. Its volume is reduced by 50% compared to traditional solutions, and it is easy to install.
Drive-Lift
Integrated Design
7kg·cm
Lifting Torque
300RPM
Drive Speed
Front Scraper Servo Motor in Floor Cleaners
The Front Scraper Servo Motor actuates the scraper to actively press down via a linkage mechanism, ensuring edge-to-edge cleaning with no blind spots. The scraper replaces traditional fabric rollers, eliminating problems of odor and bacterial breeding.
135°
Angular Range
±1°
Positioning Accuracy
65RPM
No-load Speed
Edge-Sweep Extension Drive
This drive is located on the side of robotic vacuums. It uses a compact planetary motor to drive a mechanism arm, extending the side brush for comprehensive, edge-to-edge cleaning.
160RPM
No-load Speed
2.5kg・cm
Peak Toque
DC 12V
Operating Voltage
Side Mop Lift-up Motor in Robot vacuums
The lift motor above the mop operates via a micro reduction motor driving a lead screw, enabling the mop to lift over carpets and actively press down to enhance cleaning efficiency.
2.5kg・cm
Peak Toque
270RPM
No-load Speed
60,000
Cycle Life
Ceiling Screen Drive Module
It features an integrated drive-control design, supporting up to 3kg screen load and meeting 110° opening and closing requirements. It incorporates a built-in high-lifespan brushless motor and metal worm gearbox, achieving 30k opening and closing cycles.
110°
opening and closing requirements
<45dB
Running Noise
2.5kg
Swiveling Central Control Screen Drive Module
The module adopts a lightweight design, built-in high-performance brushless motor, and CAN controller. It meets the load requirement of up to 2kg of center control screen and supports a 30°-range pitch movement in all directions (up, down, left, right).
Tilting Entertainment Screen Drive Module
It enables the screen and the front seats to operate in tandem through various working modes,including manual and collaborative command modes, facilitating synchronized adjustments to both the seat angle and screen tilt.
Sliding Central Control Screen Drive Module
It adopts metal wire rod and damping backlash design, supports up to 6kg screen load and 600mm working stroke. It can realize 50,000 cycle life and meet the requirements of 3G vibration working conditions.
Skylight Screen Drive Module
It adopts a dual-screw combined with a multi-link design to open the large canopy screen, making the rear passengers feel like a movie theater. The design of brushless gear motors supports up to 6kg and 35" large screen opening and closing.
Sunvisor Entertainment Screen Drive Module
It integrates various components such as high-lifespan brushless motors, planetary gearboxes, backlash damping, drive controllers, position sensors, etc., It supports up to 1.5kg loads and 135° of motion travel.
DMS/OMS Camera Drive Module
It adopts a micro stepper motor combined with a precision screw to allow the camera module to be raised and lowered, giving consumers no privacy leakage concerns, and its integrated design meets the needs of multiple car layout.
Robot Joint Actuator
The Robot Joint Actuator features an integrated design with high-precision closed-loop drive control and dual magnetic encoders. It also includes overload protection along with waterproof and dustproof functions.
Up to 120N·m
High Toque
24-56V
Wide Voltage Range
Servo+Motion
Dual Control Mode
Micro Planetary Gear Motor
The micro planetary gear motor is specifically designed for bionic dexterous hand joints. It integrates a brushless hollow cup motor, metal planetary gear, and an encoder.
High Dynamic
Responsiveness
Closed-Loop
Position Feedback
Low
Heat Rise
Brushless Hub Motor Series
The brushless hub motor comes with an integrated encoder and controller, providing high precision and reliability. It supports expandable planetary gearboxes and is suitable for various intelligent service robots and warehouse robot load-moving chassis.
FOC Motor
Built-in
5 N·m
Peak Torque
160rpm
Rated Speed
Precision Micro Servo Motor
The servo is developed for all-degree-of-freedom dexterous hand joints, features a highly integrated design with a stall torque of up to 1.8 kg·cm. It meets the complex motion control requirements in robot structures with limited space.
18 gram
Lightweight Design
Multi-turn 360°
Angular Range
0.59x0.39 inches
Ultra-Thin Profile
Frameless Torque Motors
The frameless torque motor is suitable for space-limited applications and supports both direct drive and operation with a planetary gearbox. It can be integrated into robotic joints, underwater drives, and industrial equipment.
Housing&Load
Highly Integrated
Rare-earth Magnets
Magnets
up to 155°C
Sustains Temperatures
R/C Airplane Model Servo
R/C Car Steering Drive
R/C Boat Drive
AR/VR Force Feedback Servo
STEAM Education Kit Servo
Logistics Shuttle Fork Toggle Servo
This servo is specifically designed for warehouse systems, featuring a modular design compatible with various fork sizes. It includes an integrated MCU and supports multiple feedback types.
Over 8kg·cm
Peak Torque
360°
Work Range
One-Click
Center Position Calibration
EOAT Electric Quick-Change Mechanism
This innovative electric quick-change mechanism features multiple closed-loop feedbacks, including position, speed, and voltage.It uses a zero-backlash dual-metal worm gear, providing exceptionally high power density and a lifespan of 300,000 cycles.
50kg·cm
Rated Torque
12rpm
Rated Speed
Electrical Isolation
Built-In Position Recognition
Electric Push-Shear Drive
This actuator is designed for applications such as industrial robotic arms and automated gripping devices. It features a force-controlled motor for torque and position closed-loop control.
30-70N
Clamping Force
15~28mm
Stroke
Power-off
Self-locking
Electric Quick-cut Drive
This drive is used in electrically controlled scissors across various industries, featuring a brushless planetary gear motor. It supports position detection and meets data collection requirements.
500N
Cutting Force
6-8mm Blade
Compatible and Multiple
-20 to 85°C
Wide Temp Range
Electric Water Sprue Cutter Actuator
This horizontal sprue cutter actuator is designed for multi-cavity injection molding, capable of trimming multiple sprue components simultaneously. It features a precision brushless planetary motor for accurate force control.
Bi-directional Movement
Cams + guides
2.5~5mm
Cutting Capacity
1s
Cutting in
Frameless Torque Motor
The high-performance frameworkless torque motor features a compact, frameless design, making it suitable for confined spaces. It includes built-in Hall sensors and is applicable in robotic joints, underwater drives, and industrial equipment.
up to 155°C
Sustained Temperatures
Highly
Integrated
Hall Effect
Position Feedback
Electric Gripper Actuator
The electric gripper actuator is designed for applications in industrial robotic arms and automated gripping equipment. It features an integrated force control motor for torque and position closed-loop feedback.
30-70N
Clamping Force
15~28mm
troke
Power-off
Self-locking
Industrial High-torque Servo
Designed for industrial applications requiring high torque, rapid response, and long lifespan, this brushless metal servo supports peak torque up to 200 kg·cm.
200 kg·cm
Peak Torque
CNC
Aluminum Alloy Body
High-precision Magnetic
Encoder Sensor
Agricultural Drone Drive
Agricultural Machinery Spreading System Drive
Powering The Future
Contact Kpower's product specialist to recommend suitable motor or gearbox for your product.
Submit Request
Youtube
TikTok
Twitter
Facebook
+86 180 0277 7165
kpowerMap